OSI/TS SCF Reference Manual

OSI/TS SCF Commands
OSI/TS SCF Reference Manual—424832-001
2-40
ALTER SERVICE #L3 Command
IPDISCARDUNSUPTHLD
is the threshold value that the IP entity compares to the counter
IPDISCARDUNSUP. IPDISCARDUNSUP is the number of times the IP discarded
an IPPDU because of an unsupported version or unsupported option. Unsupported
versions are any version other than IP version 1 (ISO 8473: 1988). Unsupported
options that cause an IPPDU to be discarded are security, complete source routing,
invalid types of source routing, complete record routing, invalid types of record
routing, and unknown options. This attribute is valid only when IPNULLLAYER is
OFF.
Value: 0 through 65535
If the threshold is 0, threshold events are never generated for this counter.
Default: 0
IPLIFETIME
specifies the interval that an IPDU can exist before being discarded during its transit
through the subnetwork(s). This attribute is valid only when IPNULLLAYER is
OFF.
Value: 1.000 through 300.000 (1 through 300 seconds)
Default: 15.000 (15 seconds)
IPNULLLAYER
enables or disables the use of the null (inactive subset) of the internet protocol in the
Network Layer. This attribute is valid only when the transport protocol class is 4.
This attribute is used only for LAN networks.
Value: ON | OFF
Default: OFF
IPX25SNDCF
specifies whether the subnetwork dependent convergence function (SNDCF) is
used. This attribute is used only for X.25 networks.
Value: ON | OFF
Default: OFF
IPX25SNDCF1980ADDR
specifies whether 1980 or 1984 addressing will be used. When ON, 1980
addressing is used; when OFF, 1984 addressing is used. When using X.25 with IP
and SNDCF, NSAPs are required. When using this protocol with 1980 addressing
(ON), the NSAP is not passed to X.25; when using 1984 addressing (OFF) the
NSAP is passed to X.25 This attribute is used only for X.25 networks.
Value: ON | OFF