OSI/TS SCF Reference Manual

OSI/TS SCF Commands
OSI/TS SCF Reference Manual—424832-001
2-41
ALTER SERVICE #L3 Command
Default: ON
X25ACCEPTCHG
specifies whether an incoming call request that contains a request for the recipient to
pay the charge is accepted. ON means that collect calls are accepted. OFF means
that collect calls are not accepted. This attribute is used only for X.25 networks.
Value: ON | OFF
Default: OFF
X25BCUG
specifies the bilateral closed user group ID sent in every call-request packet. This
attribute is used only for X.25 networks.
RESET returns this attribute to the value of the BCUG attribute in X25AM.
Value: 0 through 9999
Default: Defaults to the value of the BCUG attribute in X25AM.
X25CUG
specifies the closed user group ID (CUG ID) that is sent in every call-request
packet. This attribute is used only for X.25 networks.
RESET returns this attribute to the value of the CUG attribute in X25AM.
Value: 0 through 9999
Default: Defaults to the value of the CUG attribute in X25AM.
X25CUGTYPE
specifies the type of closed user group (CUG) facility. This attribute is used only for
X.25 networks.
Value: BASIC | EXT | BASICOA | EXTOA
Default: Defaults to the value of the CUGTYPE attribute in X25AM.
If no value is provided for X25CUG, X25CUGTYPE will default to BASIC. If
X25CUG is 0 to 99 , X25CUGTYPE can be any of the four values, and will default
to BASIC. If X25CUG is 100 to 9999, X25CUGTYPE must be EXT or EXTOA,
and will default to EXT.
Value Meaning
BASIC Basic CUG format
EXT Extended CUG format
BASICOA Basic CUG format with
outgoing access