OSI/TS SCF Reference Manual

OSI/TS SCF Commands
OSI/TS SCF Reference Manual—424832-001
2-46
ALTER SERVICE #L4 Command
ALTER SERVICE #L4 Command
An attribute-spec for the ALTER SERVICE #L4 command is one of the following
attribute name and value combinations:
ALTCLASS
specifies the protocol class to be used as an alternative to the preferred protocol
class. See the considerations for the ALTER command for a discussion of the
relationship between the ALTCLASS, CLASS, MULTIPLEX, and NETTYPE
attributes.
Value: 0 | 1 | 2 | 3 | 4
Default: None.
CHECKSUM
specifies whether checksum fields are added to TPDUs. This attribute is valid only
when the transport protocol class is 4.
[ ALTCLASS { 0 | 1 | 2 | 3 | 4 } ]
[ CHECKSUM { ON | OFF } ]
[ CHECKTSEL { ON | OFF } ]
[ CLASS { 0 | 1 | 2 | 3 | 4 } ]
[ CONNECTTIMEOUT time ]
[ DISCONNECTTIMEOUT time ]
[ EXPEDITED { ON | OFF } ]
[ EXTENDEDFORMAT { ON | OFF } ]
[ INACTIVETIMEOUT time ]
[ INBOUNDCRCONFERRTHLD number ]
[ INBOUNDCRCONGESTIONTHLD number ]
[ INBOUNDCRPROTOERRTHLD number ]
[ INBOUNDTPDUPROTOERRTHLD number ]
[ INBOUNDTPDUXSUMERRTHLD number ]
[ L4TIMEOUTTHLD number ]
[ L4WINDOW integer ]
[ MAXREXMIT integer ]
[ MULTIPLEX { ON | OFF } ]
[ NETTYPE { A | B | C } ]
[ OUTBOUNDCRCONFERRTHLD number ]
[ OUTBOUNDCRERRTHLD number ]
[ OUTBOUNDTPDUPROTOERRTHLD number ]
[ PASSIVEMUX { ON | OFF } ]
[ RECVSECURITY { “text” | RESET } ]
[ REFTIMEOUT time ]
[ REXMITTIMEOUT time ]
[ SENDSECURITY { “text” | RESET } ]
[ TCONPRI integer ]
[ TPDUSIZE
{ 128 | 256 | 512 | 1024 | 2048 | 4096 | 8192 } ]
[ TTRTIMEOUT time ]
[ TWRTIMEOUT time ]
[ WINDOWTIMEOUT time ]