OSI/TS SCF Reference Manual

OSI/TS SCF Commands
OSI/TS SCF Reference Manual—424832-001
2-47
ALTER SERVICE #L4 Command
Value: ON | OFF
Default: OFF
CHECKTSEL
specifies whether to check the responding transport address in the Connect Confirm
TPDU (CC-TPDU).
Value: ON | OFF
Default: OFF
CLASS
specifies the preferred transport protocol class. See the considerations for the
ALTER command for a discussion of the relationship between the ALTCLASS,
CLASS, MULTIPLEX, and NETTYPE attributes.
For LAN networks, the transport protocol class must be 4.
For X.25 networks, when IPX25SNDCF is OFF, the transport protocol class can be
0, 1, 2, 3, or 4.
For X.25 networks, when IPX25SNDCF is ON, the transport protocol class must be
4.
Value: 0 | 1 | 2 | 3 | 4
Default: 0
CONNECTTIMEOUT
specifies the amount of time to wait for responses to CR-TPDUs.
Value: 3.000 through 180.000 (3 through 180 seconds)
Default: 120.000 (120 seconds)
DISCONNECTTIMEOUT
specifies the amount of time to wait for responses to DR-TPDUs.
Value: 3.000 through 180.000 (3 through 180 seconds)
Default: 120.000 (120 seconds)
EXPEDITED
specifies whether the transport expedited data transfer service is supported. This
attribute is valid only when the transport protocol class is 1, 2, 3, or 4.
Value: ON | OFF
Default: OFF