OSI/TS SCF Reference Manual

OSI/TS SCF Commands
OSI/TS SCF Reference Manual—424832-001
2-48
ALTER SERVICE #L4 Command
EXTENDEDFORMAT
specifies whether the credit and sequence numbers of TPDUs should be in extended
format (ON) or normal format (OFF). This attribute is valid only when the transport
protocol class is 2, 3, or 4.
Value: ON | OFF
Default: OFF
INACTIVETIMEOUT
specifies that if no TPDU is received within the specified time, the transport
connection is aborted. This attribute is valid only when the transport protocol class
is 4.
Value: 1.000 through 500.000 (1 through 500 seconds)
Default: 30.000 (30 seconds)
INBOUNDCRCONFERRTHLD
is the threshold value that the Transport Layer compares to the counter
INBOUNDCRCONFERR. INBOUNDCRCONFERR is the number of times the
subsystem refused a CR-TPDU due to negotiation failure, duplicate source
reference, mismatched references, reference overflow, refused on the network
connection, session entity not attached to TSAP, or address unknown.
Value: 0 through 65535
If the threshold is 0, threshold events are never generated for this counter.
Default: 0
INBOUNDCRCONGESTIONTHLD
is the threshold value that the Transport Layer compares to the counter
INBOUNDCRCONGESTION. INBOUNDCRCONGESTION is the number of
times the subsystem refused a CR-TPDU due to congestion.
Value: 0 through 65535
If the threshold is 0, threshold events are never generated for this counter.
Default: 0
INBOUNDCRPROTOERRTHLD
is the threshold value that the Transport Layer compares to the counter
INBOUNDCRPROTOERR. INBOUNDCRPROTOERR is the number of times the
subsystem refused a CR-TPDU due to protocol error, invalid header, invalid
parameter length, or reason not specified.
Value: 0 through 65535
If the threshold is 0, threshold events are never generated for this counter.