OSI/TS SCF Reference Manual

OSI/TS SCF Commands
OSI/TS SCF Reference Manual—424832-001
2-54
ALTER SU Command
ALTER SU Command
An attribute-spec for the ALTER SU command is one of the following attribute name
and value combinations:
[ ALTCLASS { 0 | 1 | 2 | 3 | 4 } ]
[ CHECKSUM { ON | OFF } ]
[ CLASS { 0 | 1 | 2 | 3 | 4 } ]
[ CONNECTTIMEOUT time ]
[ DELETETIME { -1 | 0 } ]
[ DISCONNECTTIMEOUT time ]
[ EXPEDITED { ON | OFF } ]
[ EXTENDEDFORMAT { ON | OFF } ]
[ INACTIVETIMEOUT time ]
[ IPNULLLAYER { ON | OFF } ]
[ IPX25SNDCF { ON | OFF } ]
[ L4WINDOW integer ]
[ LANLOCALSNPA { "address" | RESET } ]
[ LANREMOTESNPA { "address" | RESET } ]
[ LOCALNSAP { "address" | RESET } ]
[ LOCALTSEL { "address" | RESET } ]
[ MAXREXMIT integer ]
[ MULTIPLEX { ON | OFF } ]
[ NETTYPE { A | B | C } ]
[ NSPDEVICE device ]
[ RECVSECURITY { "text" | RESET } ]
[ REFTIMEOUT time ]
[ REMOTENSAP { "address" | RESET } ]
[ REMOTETSEL { "address" | RESET } ]
[ REXMITTIMEOUT time ]
[ SENDSECURITY { "text" | RESET } ]
[ TCONPRI integer ]
[ TPDUSIZE
{ 128 | 256 | 512 | 1024 | 2048 | 4096 | 8192 } ]
[ TTRTIMEOUT time ]
[ TWRTIMEOUT time ]
[ WINDOWTIMEOUT time ]
continued