OSI/TS SCF Reference Manual

OSI/TS SCF Commands
OSI/TS SCF Reference Manual—424832-001
2-56
ALTER SU Command
CONNECTTIMEOUT
specifies the amount of time to wait for responses to CR-TPDUs.
Value: 3.000 through 180.000 (3 through 180 seconds)
DELETETIME
specifies whether to delete a subdevice after the last opener closes it. A value of 0
indicates that the subdevice is deleted immediately after the last opener closes it.
(static) A value of -1 indicates that the subdevice is not deleted (dynamic).
Value: -1 | 0
DISCONNECTTIMEOUT
specifies the amount of time to wait for responses to DR-TPDUs.
Value: 3.000 through 180.000 (3 through 180 seconds)
EXPEDITED
specifies whether the transport expedited data transfer service is supported. This
attribute is valid only when the transport protocol class is 1, 2, 3, or 4.
Value: ON | OFF
EXTENDEDFORMAT
specifies whether the credit and sequence numbers of TPDUs should be in extended
format (ON) or normal format (OFF). This attribute is valid only when the transport
protocol class is 2, 3, or 4.
Value: ON | OFF
INACTIVETIMEOUT
specifies that if no TPDU is received within the specified time, the transport
connection is aborted. This attribute is valid only when the transport protocol class
is 4.
Value: 1.000 through 500.000 (1 through 500 seconds)
IPNULLLAYER
enables or disables the use of the null (inactive subset) of the internet protocol in the
Network Layer. This attribute is valid only when the transport protocol class is 4.
This attribute is used only for LAN networks.
Value: ON | OFF
IPX25SNDCF
specifies whether the subnetwork dependent convergence function (SNDCF) is
used. This attribute is used only for X.25 networks.