OSI/TS SCF Reference Manual

OSI/TS SCF Commands
OSI/TS SCF Reference Manual—424832-001
2-62
ALTER SU Command
X25CUG
specifies the closed user group ID (CUG ID) that is sent in every call-request
packet. This attribute is used only for X.25 networks.
RESET returns this attribute to the #L3 SERVICE X25CUG value
Value: 0 through 9999
X25CUGTYPE
specifies the type of closed user group (CUG) facility. This attribute is used only for
X.25 networks.
Value: BASIC | EXT | BASICOA | EXTOA
Default: Defaults to the #L3 SERVICE X25CUGTYPE value.
If no value is provided for X25CUG, X25CUGTYPE will default to BASIC. If
X25CUG is 0 to 99 , X25CUGTYPE can be any of the four values, and will default
to BASIC. If X25CUG is 100 to 9999, X25CUGTYPE must be EXT or EXTOA,
and will default to EXT.
X25DESTADDR
specifies the network address that is issued as the called address in an outgoing call-
request packet. This attribute is used only for X.25 networks.
RESET returns this attribute to the default value (no address specified).
Value: A decimal string (0-9) up to 15 digits long.
X25NEGOTIATE
specifies the network interface characteristics that are negotiable when a connection
is offered with unacceptable values for those characteristics. If X25AM receives a
call-request packet that contains an unacceptable value for L3WINDOW, PKTSIZE,
or THRUPUT and that characteristic has been defined as negotiable, it sends a call-
accept packet containing an acceptable value for that characteristic. If the
characteristic is not negotiable, X25AM clears the call request. This attribute is
used only for X.25 networks.
Use X25NEGOTIATE to set any value(s) to a negotiable state.
Value: L3WINDOW, PKTSIZE, THRUPUT
Value Meaning
BASIC Basic CUG format
EXT Extended CUG format
BASICOA Basic CUG format with
outgoing access
EXTOA Extended CUG format with
outgoing access