OSM Migration Guide (G06.25+)

Getting Started With OSM Applications
OSM Migration Guide—527273-008
5-24
OSM Guided Procedures
For more information about performing OSM actions, including interactive actions, see
the OSM User’s Guide (also available as online help within the OSM Service
Connection). For more information about a specific guided procedure, see the online
help within that guided procedure. The guided procedure interface is launched when
you click Perform Action for the action associated with each guided procedure.
Table 5-1. OSM Guided Procedures
TSM Guided Procedure Guided Procedure Within OSM Service Connection
Replace PMF, IOMF,
SNDA, SEB, and MSEB
OSM guided procedures are launched by performing a
Replace action on the CRU to be replaced.
Configure ServerNet Node OSM guided procedure is launched by Add Node to
ServerNet Cluster action on the System object.
Replace Switch
Component
OSM Guided procedure launched by Replace action.
For HP NonStop ServerNet II Switches (model 6770), you can
replace the Switch, the UPS (uninterruptible power supply), or
the AC transfer switch.
For HP NonStop ServerNet Cluster Switches (model 6780),
you can replace the switch module, the switch logic board, or
the switch PIC.
Not available in TSM Replace ServerNet Switch Board or IOAM Enclosure.
To replace an IOAM Enclosure, the action (located under the
enclosure) is called Replace IOAM Enclosure or ServerNet
Switch Board.
To replace an individual ServerNet Switch Board, use the
Replace action under the ServerNet Switch Board object.
Table 5-2. Guided Procedures Replaced by OSM Actions
TSM Guided Procedure OSM Service Connection Equivalent
Add Switch Performed by interactive Update Topology action on the
ServerNet Cluster object along with documented procedures.
Replace Power Supply Performed by an interactive Replace action on the Power
Supply CRU or component.
SWAN Fast Firmware
Update
See Using the Multi-Resource Actions Dialog Box for Firmware
Updates on page 5-6.
Troubleshoot ServerNet
Fabric
Functionality provided by interactive External Loopback Test
action for ServerNet PICs on MSEB and IOMF2 CRUs.
Update Switch Replaced by Firmware Update and Configuration Update
actions.
Not available in TSM Interactive Replace action to replace an FCSA