OSM Migration Guide (G06.28+)
Table Of Contents
- What’s New in This Manual
- About This Guide
- 1 Introduction to OSM
- 2 Preparing for OSM
- 3 OSM Server-Based Components
- 4 OSM Client-Based Components
- 5 Getting Started With OSM Applications
- 6 TSM Coexistence and Fallback
- A Migrating Your Registry Settings
- B Memory Guidelines for OSM
- C Configuring Remote Services
- Configure Modem for Dial-In and Dial-Out
- Create Windows User Name
- Configure Carbon Copy 5.7 or Microsoft NetMeeting for Dial-In
- Configure OSM Notification Director (ND) for Each Host Server
- Configure OSM Notification Director (ND) for Dial-In and Dial-Out
- Configure Incoming Connections
- Reconfigure System Standby and Hibernate Mode
- D Troubleshooting
- E Uninstalling TSM
- Index
Preparing for OSM
OSM Migration Guide—527273-015
2-2
Server Software Requirements
Server Software Requirements
OSM requires the G06.10 RVU or later. Prerequisite SPRs for OSM lists the requisite
SPRs for using OSM on each RVU. There is also one Recommended SPR for
Improved OSM Performance, available at G06.15 and later.
Prerequisite SPRs for OSM
This table lists the prerequisite SPRs – those needed in addition to the actual OSM
Server SPR) – for each RVU on which OSM is supported.
OSM Server SPR
For G06.22 and later, OSM server-based SPR(s) are available on the SUT. To install
OSM on earlier RVUs, or to get the latest OSM SPR without migrating to a new RVU,
OSM is also available from NonStop Scout.
Starting with G06.25, the OSM server-based components are combined into a single
SPR, T0682. See OSM SPRs Obsoleted by T0682 on page 3-1 for a list of the SPRs
replaced by T0682.
The following sections describe special considerations for upgrading your current OSM
server SPRs to T0682, depending on whether you are:
•
Migrating to the G06.25 RVU (or later), or
•
Installing T0682 on an Earlier RVU
For more information on migrating to the latest RVU, or installing SPRs on an existing
RVU, see the G06.xx Software Installation and Upgrade Guide and the DSM/SCM
User’s Guide.
Section 3, OSM Server-Based Components, describes how to configure and start OSM
server processes.
Section 4, OSM Client-Based Components, describes the OSM client-based SPRs.
Table 2-1. SPRs Required for OSM
RVU Prerequisite SPRs
G06.10
•
T9753AFC (I/O Drivers)*
(T9753AFC requires a system load, plus:
T0021AAT, T0054AAF, T0317ABD, T0480AAE, T1067AAO,
T1074AAG, T1075AAP, T1076AAS, T1082AAL, T1083AAT,
T7892AAM, T7945ABD, T8374AAR, T8461AAE, T9023ADP,
and T9055ADU.)
•
T1089ABK (SP)
G06.11-G06.20
•
T1089ABK (SP)
G06.21-G06.23 None
G06.24 and later
•
T0648AAA (Part Number Translation Table)