OSM Service Connection User's Guide (G06.30+)

the FESA is currently in use (and stops it only after you confirm).
FSAC (Fiber ServerNet Addressable Controller)
Attributes
Actions
The Fiber SAC (ServerNet addressable controller) is a fiber-optic plug-in card mounted on the
ServerNet/DA CRU. External storage devices are physically connected to the Fiber SACs. There can
be up to four Fiber SACs on each ServerNet/DA CRU.
Location in OSM Tree: System > Group > Module > SNDA > FSAC
Example: FSAC (11.1.53.1)
Attributes
FSAC
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK. Values
Physical
Track ID The track ID of the switch logic board.
Part Number The part number of the switch logic board.
Hardware Revision The hardware revision of the switch logic board.
CRU Type
The type of CRU this SAC is connected to.
Values: SSAC, FSAC, SCSI
Logical
Configured Type
The type of storage device supported by this Fiber SAC.
Values: Disk, Tape, SCSI Controller, Not Configured, Unknown
Actions
Responsive Test
Verifies that the component is connected and responding.