OSM Service Connection User's Guide (G06.30+)

Example: G4SA SAC $ZZLAN.G4SA1.0
Attributes
G4SA SAC
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK. Values
Logical
Automatic Boot State
Indicates whether the SAC boot firmware is automatically reloaded if it
terminates abnormally.
Enabled: The boot firmware is automatically reloaded.
Disabled: The boot firmware is not automatically reloaded.
Unknown: Automatic Boot state could not be read.
Automatic Dump State
Indicates whether the SAC will dump information about the reasons the
SAC aborts operations.
Values, as established through the SCF AUTODUMP command, are:
Disabled: Indicates that the SAC will not autodump.
Enabled: Indicates that SAC will autodump.
Extended: Indicates that additional information is dumped. The size of an
extended G4SA dump file is significantly larger. Use this option only at the
direction of HP service provider.
Device State
The state of the component as known to the operating system on the server.
Values
Download File Name The file name of the operational firmware running on the SAC.
Download File Version The version of the operational firmware running on the SAC.
Dump File Name
Displays the default naming convention for dump files. The default value
($SYSTEM.SYS00.C061D00) can be altered in SCF. The first dump file
name ends in 00. Each subsequent dump file automatically receives the
next sequential number.
Owning Processor The processor to which the G4SA SAC is connected.
Processor Access List
The currently available processors that can access the resource.
Example: 0,1,4,8,9
Firmware
Version The version of the boot firmware for the SAC.
Default File Name
The name of the file to be used for a (boot) Firmware Update.