OSM Service Connection User's Guide (G06.30+)

Monitored Service LAN Devices
Attributes
Actions
Contains Maintenance Switch and UPS objects that you have configured OSM to monitor through
the actions on this object.
Location in OSM Tree: System > Monitored Service LAN Devices
Attributes
None.
Actions
Start Monitoring Maintenance Switch
Causes the OSM Service Connection to display and start monitoring the maintenance switch. You
are prompted to enter a User ID and Password (which are established by the administrator during
initial configuration of the maintenance switch), the IP address of the maintenance switch, and a
name (between 1 and 60 characters, to be displayed by OSM as part of the maintenance switch object
name).
Start Monitoring UPS
Causes the OSM Service Connection to display and start monitoring the UPS. You are prompted to
enter a User ID and Password (which are established by the administrator during initial configuration
of the UPS), the IP address of the UPS, and a name (between 1 and 60 characters, to be displayed by
OSM as part of the UPS object name).
MSEB
Attributes
Actions
Modular ServerNet expansion boards (MSEBs) allow processors in one enclosure to communicate
with processors in other nodes of a ServerNet cluster on one fabric. MSEBs contain ServerNet
plug-in cards (PICs), which provide ServerNet connectivity by means of fiber-optic cables.
Each node in a ServerNet cluster must have two MSEBs for fault tolerance, one for connectivity to a
switch on the X fabric and the other for connectivity to a switch on the Y fabric.
Location in OSM Tree: System > Group > Module > MSEB
Slot Location: MSEBs must be located in slots 51 and 52 of processor enclosures (service side).