OSM Service Connection User's Guide (G06.30+)

PIF
Attributes
Actions
Physical interface (PIF) objects are the ports on these resources through which LAN connections are
made:
Ethernet ServerNet addressable controllers (E4SA SACs)●
Fast Ethernet ServerNet addressable controller (FESA SACs)●
Gigabit Ethernet ServerNet addressable controllers (GESA SACs)●
Common Controller ServerNet addressable controllers (CCSA SACs)●
Token Ring ServerNet addressable controllers (TRSA SACs)●
Location in OSM Tree: System > Group > Module > CRU > SAC > PIF
Example: TRSA PIF $ZZLAN.TRSA0.0.B
Attributes
PIF
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK. Values
Logical
Current Configured Speed
Valid only for FESA and GESA PIFs.
The transmission rate for the ServerNet addressable controller.
Duplex Mode
The transmission mode for the ServerNet addressable controller.
Values: Half Duplex, Full Duplex, Unknown
Network MAC Address The media access control (MAC) address of the PIF network.
Maximum Speed
The maximum transmission rate for the ServerNet addressable
controller.
Values: 10 megabits per second, 100 megabits per second, Unknown
Device State
The state of the component as known to the operating system on the
server. Values
Processors with Data Path
The processor numbers for processors that have a successful data path to
the PIF. If no processor has a path, "None" is shown.
Example: (0,1)
Hardware MAC Address The media access control (MAC) address of the PIF hardware.