OSM Service Connection User's Guide (G06.30+)

Diagnostic Data Collection Volume
Indicates the volume in which automatic or manual data
collection will take place. This volume is assigned by
using the Set Data Collection Volume action.
Days to Persist Collected Diagnostic
Data
Indicates the number of days that collected hardware
failure data (collected either automatically or by the
Collect Diagnostic Dataaction) is retained on the system
before being deleted.
Incident Report Configuration
Problem Incident Report Creation State
Indicates whether or not OSM's ability to create Problem
Incident Reports has been suppressed. This suppression is
accomplished by the Suppress Problem Incident Report
Creation action and is desirable to stop dial-out of known
problems, such as those that may occur during CRU
replacements.
Values: Suppressed, Unsuppressed
Reason for Suppression
Why the creation ability was suppressed, displayed as free
form text.
This attribute is shown only if the Problem Incident Report
Creation State value is Suppressed.
Time of Suppression
The date and time the creation ability was suppressed.
This attribute is shown only if the Problem Incident Report
Creation State value is Suppressed.
Duration of Suppression
How long the suppression will last (in minutes). The
default value is 40 minutes. You can extend he time using
the Extend Problem Incident Report Suppression Time
action.
This attribute is shown only if the Problem Incident Report
Creation State value is Suppressed.
Actions
Add Node to ServerNet Cluster
Launches a guided procedure that adds the local system to a ServerNet Cluster. This procedure is
also used to configure or display information for Expand-over-ServerNet line handlers.
Collect Diagnostic Data
This action collects diagnostic data for your system. Upon performing the action, you are prompted
to specify date and time parameters. Based on the date and time specified: