OSM Service Connection User's Guide (G06.30+)

Actions
Node Connectivity ServerNet Path Test
Checks the local node's connection to the ServerNet cluster by testing the external fabric (X or
Y) between the MSEB on the local node and the cluster switch on the fabric.
Remote 6770 Switch
Attributes
Actions
The nodes connected directly to one switch see the other switches as remote switches. Although
local and remote switches are the same from a hardware standpoint, less information and no
actions are available for the remote switch. To perform actions or get additional information on
a remote switch, establish a service connection from one of the nodes that connects directly to
that switch.
Location in OSM tree: External ServerNet Fabric > Remote Switch
The last part of the switch name indicates the fabric and position of the switch in the topology.
Example: Remote Switch $ZZSMN.X2
Attributes
Remote Switch
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK. Values
Physical
Configuration Tag
A parameter used by SCF and the guided procedures that allows
SANMAN to select an appropriate switch configuration block (SCB)
from the M6770CL switch configuration library. The selected SCB is
subsequently loaded on the specified switch. The configuration tag
determines the position of the cluster switch in the topology and the
ServerNet node numbers supported by the cluster switch. Values
Example: Max 24 nodes, nodes 1-8
GUID
A unique, read-only number stored in nonvolatile memory
(SEEPROM) on a ServerNet II switch. The Globally Unique ID can be
used programmatically to identify the switch.