OSM Service Connection User's Guide (G06.30+)

Physical
Manufacturer Identifies the manufacturer of the component.
Part Number The part number of the UPS.
Type
The VA rating (volts multiplied by amps) and the firmware version of the UPS.
Example: UPS 1440 VA FW -0039
Logical
Estimated Charge Remaining The percentage of charge remaining in the UPS batteries.
Remaining Time
The amount of time remaining (in minutes) that the UPS battery
will provide power to the switch in the event that both the
primary and backup rails lose power, or if the input voltage of
the AC power source is not within the allowable range.
Remaining Capacity Status
The remaining capacity level in the UPS batteries.
Values: Normal, Low, Depleted
If the value is Depleted, the UPS is unable to sustain the present
load if utility power is lost or absent.
Actions
Replace
Launches the Replace Switch Component guided procedure, which provides help for replacing
the component.
Common Attribute Values
Service State
Fabric State
Configuration Tag
Port Connectivity Status
Service State
This attribute appears in the list of attributes only when attention or service is required.
Value Meaning
OK
The object is functioning properly. This value appears only in the Problem
Summary dialog box.