OSM Service Connection User's Guide (G06.32+)

Test Backup Path Access
Tests two-way access to the communications line interface processor (CLIP) using the alternate address.
Test Basic Online
Runs an online test to determine if the CLIP is functional, and checks that both the access paths are available.
Test Full Path Access
Tests two-way access to the communications line interface processor (CLIP) using both the primary and alternate
addresses.
Test Primary Path Access
Tests two-way access to the communications line interface processor (CLIP) using the primary address
Test Verify
Runs the power-on self-test for the CLIP. The FAULT LED on the CLIP flashes during the test. If the test passes, the
FAULT LED goes off. If the test fails, the FAULT LED remains on continuously.
SWAN CLIP 199