OSM Service Connection User's Guide (G06.32+)

Performing Actions on Cluster Resources
Some of the actions you can perform on resources within a ServerNet cluster include:
• Testing ServerNet cluster connectivity. Perform the Node Connectivity ServerNet Path Test for the external
ServerNet fabrics, the Node Responsive Test for the 6780 switch node port, and the Responsive Test for the
6780 switch module.
• Starting and stopping the ServerNet cluster subsystem ($ZZSCL). Perform the Set ServerNet Cluster State
action on the ServerNet Cluster resource.
• Switching the primary and backup processors for SANMAN and SNETMON. Perform the Switch SANMAN
Process Pair and Switch SNETMON Process Pair actions on the ServerNet Cluster resource.
• Setting LEDs on switch or switch components to blink so the resource can be easily located. Perform the Blink
LED action for 6780 switch components and the Blink All LEDs action for the 6780 switch module. For the
ServerNet II switch component of the 6770 switch, perform the Blink LED action.
• Assigning a text string to help locate a cluster switch. See Specifying a Cluster Switch Locator String.
• Updating firmware, configuration, and FPGA code for the 6780 ServerNet switch. Perform the Firmware Update,
Configuration Update, and FPGA Updateactions on the switch logic board component.
• Updating firmware and configuration for the 6770 cluster switch. Perform the Firmware Update and Configuration
Update actions on the ServerNet II switch component.
• Replacing components of a cluster switch using the Replace Switch guided procedure. To launch the guided
procedure, navigate to the switch component and perform the Replace action.
Performing actions on ServerNet cluster resources is similar to performing actions on resources within a server. First
expand the ServerNet Cluster resource in the tree pane and then navigate to the cluster resource on which you want
to perform an action.
232 Managing a ServerNet Cluster