OSM Service Connection User's Guide (G06.32+)

Viewing the Alarms Tab
The details pane displays attribute and alarm information about a selected resource, depending on which tab you
select. If there are any alarms for a selected resource, a bell icon appears on the Alarms tab.
The Alarms tab provides this information about the selected alarm:
• Alarm severity
The Severity column contains a colored icon corresponding to the severity of the alarm. Red icons represent
Critical and Major alarms.Yellow icons represent Minor, Warning, and Indeterminate alarms. See Alarm Severity.
• Time and date the alarm occurred
• Description of the alarm, including the probable cause
• Whether the alarm is dialed out to your service provider (assuming your system console is configured to dial
out).
To view alarms in the Alarms tab:
1. In either the tree or view pane, click a resource.
2. In the details pane, click the Alarms tab to display the alarms for the selected resource.
For additional alarm details, right-click on the alarm and select Details.
To act on alarms in the Alarms tab:
Right-click on the alarm and select:
• Delete
• Suppress
• Unsuppress
64 Viewing Alarms