OSM User's Guide (G06.27+)

Power State
Whether the component is powered on. Values
Part Number
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
Track ID
A unique serial number that identifies the component. Track IDs are used for
tracking components.
Hardware Revision
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components.
Logical
Configured Type
The configuration type of this resource.
Values: CCSA, E4SA, FESA, G4SA, GESA, TRSA, Unknown
Device State
The state of the component as known to the operating system on the server.
Values
Actions
Abort
Terminates operation of the Fast Ethernet ServerNet adapter (FESA) and the associated Ethernet
ServerNet addressable controller (SAC). When the Abort action finishes, the FESA and the SAC are
in the Stopped state.
Start
Starts the Fast Ethernet ServerNet adapter (FESA) and the associated Ethernet ServerNet addressable
controller (SAC). The FESA and the SAC must be in the Stopped state before you perform this
action.
During startup, the controller operational code is automatically loaded into the SAC. When the Start
action completes, both the FESA and the SAC are in the Started state.
Stop
Rather than automatically stopping the FESA (as the Abort action does), this action first warns you if
the FESA is currently in use (and stops it only after you confirm).
FSAC (Fiber ServerNet Addressable Controller)
Attributes
Actions
The Fiber SAC (ServerNet addressable controller) is a fiber-optic plug-in card mounted on the
ServerNet/DA CRU. External storage devices are physically connected to the Fiber SACs. There can