OSM User's Guide (G06.27+)
Table Of Contents
- OSM User's Guide
- OSM User's Guide
- What's New in This Guide
- About This Guide
- Related Reading
- Chapter 1. Introducing OSM
- Chapter 2. Preparing the OSM Environment
- Chapter 3. Configuring OSM
- Chapter 4. Starting the OSM Service Connection
- Chapter 5. Using the Management Window
- Chapter 6. Viewing Alarms
- Chapter 7. Viewing Attributes
- Chapter 8. Performing Actions
- Chapter 9. Viewing Summary Reports
- Chapter 10. Managing a System
- Chapter 11. System Resources
- Chapter 12. Managing a ServerNet Cluster
- Chapter 13. Cluster Resources
- Chapter 14. Updating ServerNet Cluster Topology
- Glossary
- Index
- Legal Notice
- Version and Copyright Information
Optional Parameter: File Name
Reload
Loads the operating system into the processor from a specific disk location.
Reset
Stops the processor and terminates all processes running on it. Places the processor in a known state,
ready for a Prime for Reload action or Load action.
Responsive Test
Verifies that the processor is configured and responding.
SAC (ServerNet Addressable Controller)
Attributes
Actions
A LAN controller that is a component of one of these CRUs:
CRU SACs in CRU PIFs in SAC
CCSA 4 4
E4SA 2 2
FESA 1 1
GESA 1 1
TRSA 1 1
Location in OSM Tree: System > Group > Module > CRU > SAC
Slot Location: SACs are located on the CRUs that might be installed in slots 53 and 54 in processor
enclosures (service side) or in slots 51, 52, 53, and 54 in I/O enclosures (service side).
Example: E4SA SAC $ZZLAN.E4SA0.0
Attributes
SAC
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK. Values
Physical