OSM User's Guide (G06.27+)

SCSI-to-Fiber Converter. A Fibre Channel (scsi to fiber) converter is used to connect the following
tape drives:
CT9840FC●
CT9841FC●
to the host system through a SCSI SAC on one of these supported CRUs:
PMF2●
IOMF2●
ServerNet/DA●
Location in OSM Tree: System > Tape Collection > Tape Drive > Storage Router
Example: Storage Router $EXT8
Attributes
Storage Router
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK. Values
Logical
Router Type
The type of router.
Values: SCSI Extender or SCSI-to-Fiber Converter
Logical Device Number The number assigned to the router by the file system.
Communication State
Whether the resource is communicating to the host system.
Values: Communicating, Not Communicating, Unknown
Product ID
A unique number that identifies the product as a SCSI Extender (2
models) or SCSI to Fiber Converter. Otherwise, Unknown is shown.
Device State
The state of the component as known to the operating system (open
scsi process) on the server. Values
Configured Controller
Location
The location of the configured SCSI controller.
Example: PMF.SAC-3.GRP-1.MOD-1.SLOT-55
Physical
Part Number
The part number of the component that was assigned in manufacturing. Use part
numbers for identifying and ordering parts. This is not the spare part number.
Process Pair