OSM User's Guide (G06.27+)

Advanced Storage Configuration State
Indicates whether or not the system has been configured to
allow advanced storage configurations. This feature is
enabled/disabled using the Enable and Disable Advanced
Storage Configuration actions.
Currently supported advanced storage configurations
include Flexible Disk Configuration (see FDC Support Note
for more information) and ESS disk configuration (this
attribute must be enabled before you can configure ESS
disks in SCF).
Values: Enabled, Disabled, Unknown
Data Collection Services
Automatic Data Collection State
Indicates whether automatic data collection for failed
system resources is enabled or disabled. To change this
attribute state, use the Enable or Disable Automatic Data
Collection actions.
Diagnostic Data Collection Volume
Indicates the volume in which automatic or manual data
collection will take place. This volume is assigned by
using the Set Data Collection Volume action.
Days to Persist Collected Diagnostic Data
Indicates the number of days that collected hardware
failure data (collected either automatically or by the
Collect Diagnostic Dataaction) is retained on the system
before being deleted.
Incident Report Configuration
Problem Incident Report Creation State
Indicates whether or not OSM's ability to create Problem
Incident Reports has been suppressed. This suppression is
accomplished by the Suppress Problem Incident Report
Creation action and is desirable to stop dial-out of known
problems, such as those that may occur during CRU
replacements.
Values: Suppressed, Unsuppressed
Reason for Suppression
Why the creation ability was suppressed, displayed as free
form text.
This attribute is shown only if the Problem Incident Report
Creation State value is Suppressed.
Time of Suppression
The date and time the creation ability was suppressed.
This attribute is shown only if the Problem Incident Report
Creation State value is Suppressed.