OSM User's Guide (G06.27+)
Table Of Contents
- OSM User's Guide
- OSM User's Guide
- What's New in This Guide
- About This Guide
- Related Reading
- Chapter 1. Introducing OSM
- Chapter 2. Preparing the OSM Environment
- Chapter 3. Configuring OSM
- Chapter 4. Starting the OSM Service Connection
- Chapter 5. Using the Management Window
- Chapter 6. Viewing Alarms
- Chapter 7. Viewing Attributes
- Chapter 8. Performing Actions
- Chapter 9. Viewing Summary Reports
- Chapter 10. Managing a System
- Chapter 11. System Resources
- Chapter 12. Managing a ServerNet Cluster
- Chapter 13. Cluster Resources
- Chapter 14. Updating ServerNet Cluster Topology
- Glossary
- Index
- Legal Notice
- Version and Copyright Information
SCF Equivalent: SCF ALTER SWITCH $ZZSMN, NEAREST { X | Y }, FABRIC { X| Y }
Soft Reset
Used following a Firmware Update action on the switch for the changes to take effect.
SCF Equivalent: SCF RESET SWITCH $ZZSMN, NEAREST { X | Y }, SOFT
Switch Fan
Attributes
Actions
A component that circulates air into the enclosure to help maintain optimal temperature.
Location in OSM tree: External ServerNet Fabric > Switch Group > Switch Module > Switch
Fan
Example: Fan (1020.1.16)
Attributes
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK. Values
Physical
Presence
Whether the fan is installed and responding.
Values: Present, Absent, Unknown
LED State
The state of the fault LED on the fan.
Values: On, Off, Blinking
Logical
Enabled State
The initial state of the component at the time of discovery.
Enabled: The component is operational.
Disabled: The component is present but not operational, possibly because the
Disable action was performed.
Device State
Indication of whether the fan has a fault.
Values: OK, Fault