OSM User's Guide (G06.27+)
Table Of Contents
- OSM User's Guide
- OSM User's Guide
- What's New in This Guide
- About This Guide
- Related Reading
- Chapter 1. Introducing OSM
- Chapter 2. Preparing the OSM Environment
- Chapter 3. Configuring OSM
- Chapter 4. Starting the OSM Service Connection
- Chapter 5. Using the Management Window
- Chapter 6. Viewing Alarms
- Chapter 7. Viewing Attributes
- Chapter 8. Performing Actions
- Chapter 9. Viewing Summary Reports
- Chapter 10. Managing a System
- Chapter 11. System Resources
- Chapter 12. Managing a ServerNet Cluster
- Chapter 13. Cluster Resources
- Chapter 14. Updating ServerNet Cluster Topology
- Glossary
- Index
- Legal Notice
- Version and Copyright Information
Actions
Blink LED Off
Turns off the blinking of the fault LED.
Blink LED On
Causes the fault LED to blink on and off.
Switch Group
Attributes
Actions
A collection of up to four 6780 switches connected together, typically mounted in a rack, that
reside on one fabric of a cluster switch zone. The switch group is identified by a four-digit
number. The first two digits (10) distinguish a switch group from a group within a NonStop
S-series server. The third digit represents the zone number of the switch group, and the fourth
digit indicates the external ServerNet fabric where the switch group is located (0 for the X
fabric and 1 for the Y fabric).
Location in OSM tree: External ServerNet Fabric > Switch Group
Example: Switch Group 1020 (The switch group in zone 2 on the X fabric)
Attributes
Switch Group
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK. Values
Logical
Presence
Whether the switch group is installed and responding.
Values: Present, Absent, and Unknown
Actions
None.