OSM User's Guide (G06.27+)
Table Of Contents
- OSM User's Guide
- OSM User's Guide
- What's New in This Guide
- About This Guide
- Related Reading
- Chapter 1. Introducing OSM
- Chapter 2. Preparing the OSM Environment
- Chapter 3. Configuring OSM
- Chapter 4. Starting the OSM Service Connection
- Chapter 5. Using the Management Window
- Chapter 6. Viewing Alarms
- Chapter 7. Viewing Attributes
- Chapter 8. Performing Actions
- Chapter 9. Viewing Summary Reports
- Chapter 10. Managing a System
- Chapter 11. System Resources
- Chapter 12. Managing a ServerNet Cluster
- Chapter 13. Cluster Resources
- Chapter 14. Updating ServerNet Cluster Topology
- Glossary
- Index
- Legal Notice
- Version and Copyright Information
Actions
Blink LED Off
Turns off the blinking of the fault LED.
Blink LED On
Causes the fault LED to blink to make it easier to identify the component.
Configuration Update
Loads a configuration file from the local node to the switch logic board and prompts the user to
change the numeric selector to the desired value. For details, see the ServerNet Cluster 6780
Planning and Installation Guide.
Optional Parameter: File Name the name of the configuration file on the local node
Syntax: $volume.subvolume
Default value: $SYSTEM.SYSnn
Dump
Copies a memory image from a 6780 switch to a specified file on the local system.
Firmware Update
Loads a firmware file from the local node to the switch logic board. For details, see the
ServerNet Cluster 6780 Planning and Installation Guide.
Optional Parameter: File Namethe name of the firmware file on the local node
Syntax: $volume.subvolume
Default value: $SYSTEM.SYSnn
FPGA Update
Loads an FPGA code file from the local node to the switch logic board. For details, see the
ServerNet Cluster 6780 Planning and Installation Guide.
Optional Parameter: File Namethe name of the FPGA code file on the local node
Syntax: $volume.subvolume
Default value: $SYSTEM.SYSnn
Hard Reset