OSM User's Guide (G06.27+)
Table Of Contents
- OSM User's Guide
- OSM User's Guide
- What's New in This Guide
- About This Guide
- Related Reading
- Chapter 1. Introducing OSM
- Chapter 2. Preparing the OSM Environment
- Chapter 3. Configuring OSM
- Chapter 4. Starting the OSM Service Connection
- Chapter 5. Using the Management Window
- Chapter 6. Viewing Alarms
- Chapter 7. Viewing Attributes
- Chapter 8. Performing Actions
- Chapter 9. Viewing Summary Reports
- Chapter 10. Managing a System
- Chapter 11. System Resources
- Chapter 12. Managing a ServerNet Cluster
- Chapter 13. Cluster Resources
- Chapter 14. Updating ServerNet Cluster Topology
- Glossary
- Index
- Legal Notice
- Version and Copyright Information
LED State
The state of the fault LED on the switch PIC.
Values: On, Off, On and Blinking, Off and Blinking
Track ID The track ID of the switch PIC.
Hardware Revision The hardware revision of the switch PIC.
Presence Whether the PIC is installed and responding.
Logical
Enabled State
The initial state of the component at the time of discovery.
Enabled: The component is operational.
Disabled: The component is present but not operational.
Device State
Indication of whether the switch has a fault.
Values: OK, Fault
Actions
Blink LED Off
Turns off the blinking of the LEDs.
Blink LED On
Causes the LEDs to blink on and off.
Replace
Invokes the Replace Switch Component guided procedure that helps to replace the switch PIC.
Switch Power Supply
Attributes
Actions
A component in the switch modules that converts standard AC line voltage and distributes DC
power to all components in the module.
Location in OSM tree: External ServerNet Fabric > Switch Group > Switch Module > Switch
Power Supply
Example: Power Supply (1010.1.18)