OSM User's Guide (G06.27+)

Fibre Channel
Controller
Identifies the FCSA FSAC connected to the disk drive enclosure through Port
A.
Example: FCSA FSAC (111.3.1.1)
Configured
Controller Location
The location of FCSA connected to the disk drive through Port A.
Example: FCSA.FSAC-1.GRP-111.MOD-3.SLOT-1
Actions
None.
Disk
Attributes
Actions
An internal 3.5-inch hard disk drive. Each disk drive connects to one of two SCSI buses on either a
(PMF), IOMF) or an IOMF2 CRU.
Disk CRUs can be located in slots 01 through 08 and slots 11 through 18 in processor and I/O
enclosures (appearance side). SCSI terminators are in slots 09, 10, 19 and 20, for a total of 16
available disk slots.
Location in OSM Tree: System > Group > Module > Disk
Example: Disk $SYSTEM-P (1.1.11)
Attributes
Disk
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK. Values
Physical
Power State
Indication of whether the component is powered on. Values
Part Number
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
Track ID
A unique serial number that identifies the component. Track IDs are used for
tracking components.
Hardware Revision
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components.
Logical