OSM User's Guide (G06.28+)

FSAC
Represents the actual presence of the FCSA FSAC containing the
primary disk path SCSI controller. This attribute is displayed only if
the physical FCSA FSAC is present.
Port Name
A number that uniquely identifies the port through which the disk is
connected.
Disk Pair
Disk Pair Name
The name of the ESS disk that this disk is paired with. A "-P" designation
following the disk name indicates primary disk; "-M" indicates mirrored disk.
Process Pair
Configured Processors
The 2 processors in which this I/O process is configured to run.
Example: 0,1
Primary Execution State
The state of the primary I/O process.
Values: Running, Stopped
Primary Process ID
The process ID of the primary I/O process. If the state of the primary I/O
process is Stopped, this will not be displayed.
Example: 1,296
Backup Execution State
The state of the backup I/O process.
Values: Running, Stopped
Backup Process ID
The process ID of the backup I/O process. If the state of the backup I/O
process is Stopped, this will not be displayed.
Example: 1,285
Actions
Abort Backup Path
Terminates operation of the backup path to the disk. When the Abort action finishes, the path is in a
Hard Down state. You must use the Reset Backup Path action before you can start the path again.
Abort Disk
Terminates operation of the all paths for the disk. When the Abort action finishes, the paths are in a
Hard Down state. You must use the Reset Disk action before you can start the paths again.
Abort Primary Path
Terminates operation of the primary path to the disk. When the Abort action finishes, the path is in
the Stopped state.