OSM User's Guide (G06.28+)

A set of components that share a common hardware interconnection, such as a backplane. This object
applies only to S-series processor and I/O enclosures, in which each enclosure contains contains one
group, and a group contains only one module. The module is considered a subcomponent of the
group. IOAM enclosures contain two I/O adapter modules.
Example: Module 2.1
Attributes
Module
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK. Values
Physical Location
The values displayed by these attributes are assigned through the Set Physical Location action.
Rack Name
A user-defined name assigned to identify the rack in which the module is
located.
Rack Offset A number assigned to describe the location of the module within the rack.
Locator
An optional text string assigned to further identify the physical location of
the module.
This attribute is displayed only if a value is specified using the Set Physical
Location action.
Alarm Panel Identifier
For Telco systems only.
This attribute is displayed only if a value is specified using the Set Physical
Location action.
Temperature Sensor
Current Value The current temperature, in degrees Celsius (°C), inside the enclosure of the module.
Actions
Rediscover
Causes OSM to refresh and reanalyze all components within the module. Use this action in situations
such as:
OSM does not recognize a new CRU following a CRU replacement.●
An alarm remains after the alarm condition has been fixed.●
Redundant Power Scrub