OSM User's Guide (G06.28+)

Causes the power supplys (amber) fault LED to blink on and off.
SCF Equivalent: SCF Control SAC $ZZSTO.#sac-name, deviceid(shelf,bay), LED ON
Replace
Displays the procedure for replacing the power supply.
Power Supply (IOAM)
Attributes
Actions
Supplies power to the IOAM. There are two IOAM power supply units in each IOAM.
For information on how to replace an individual Power Supply, see the CSSI web site.
Note: If a ServerNet switch board is not present, the IOAM power supplies will not appear in
OSM.
Location in OSM Tree: System > Group > IOAM Enclosure > IOAM > Power Supply
Example: Power Supply (13.2.15)
Attributes
IOAM Power Supply
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK. Values
Physical
Hardware Revision
Part Number
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
Manufacturer Identifies the manufacturer of the component.
Serial Number
The serial number of the component assigned to it by the supplier of the
component.
Type
Logical
Device State
The state of the component as known to the operating system on the server. Values