OSM User's Guide (G06.28+)

Link State
The status of the Ethernet link.
Values: Up, Down, Not Available
Duplex Mode
The duplex mode of the connection between the logic board and the router.
Values: Half Duplex, Full Duplex, Not Available
Maximum Speed
The maximum speed of the connection between the logic board and the router.
Values: 10Mbps, 100Mbps, Not Available
Board State
The operational status of the SWAN 2 LAN logic board CRU.
Values: OK, Fault, Not Available
Actions
None.
SWAN Line
Attributes
Actions
A subcomponent of SWAN CLIPs and SWAN 2 CLIPs. Every CLIP has two lines, which represent
the ports on the CLIP.
Location in OSM Tree: System > SWAN Collection > SWAN > CLIP > Line
Example: Line $ZZWAN.#SWAN2.1.0
Attributes
Line $ZZWAN
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK. Values
Logical
Device Name
The name of the WAN device associated with the line.
Example: $TP6S1
If no device is configured, "FREE" is shown.
DLC Task Name
The name of the data link control (DLC) task associated with the line.
Format: adapter name.clip number.DLC line number
Example: $ZZWAN.#D08XE5.1.DLC0