OSM User's Guide (G06.28+)

Enabled
The battery can accept a charge and is ready to supply power if the AC power is
unavailable.
Fault Check the battery for alarms. If the condition persists, contact your service provider.
Unknown The battery is not responding, and its state cannot be determined.
Compare State
Value Meaning
Same Current and default versions are the same.
Up-rev The current version is newer than the default version.
Down-rev The default version is newer than the current version.
Unknown Unable to compare files.
Device State
Value Meaning
Aborting Processing is terminating.
AC Power Loss The device is currently not powered by either AC or UPS.
Defined State is defined by the NonStop OS.
Degraded Performance is degraded.
Diagnose A diagnostic test is running on the component.
Initializing Processing is starting up.
Not Configured The component is not configured.
Not Available State is not available to OSM.
OK Component is accessible.
On The device is powered on
Started The component is running.
Starting Processing is starting up.
Stopped Processing has been terminated.
Stopping Processing is being terminated.
Unknown Component is not responding.
Enabled State
Value Meaning
Disabled
The component is present but not operational, possibly because the Disable action was
performed.
Enabled The component is operational.
Fault
A problem was detected. The component might be functioning below standard or not
responding. Inspect the component.
Off The component is not functional.