OVNM 5.3 - Operations Agent for NonStop Installation Guide

Appendix G: Sample InstInfo File 130
SecondaryTaclPrompt: 1
b24options: 0
closetdf: NO
b24linelstobj: NO
b24linklstobj: NO
b24processlstobj: NO
b24stationlstobj: NO
b24systemlstobj: NO
InstallationDate: AUGUST 2, 2011 2:19:59
LastModifiedTime: AUGUST 2, 2011 2:19:5
The following table lists and explains the various fields available in the Instinfo file.
Table 3 INSTINFO Parameters
Parameter
Description
Default Value
Product
Specify the name of the product as
OVNM
WorkSubvol
Specify the name of the work subvolume.
This field is created when a node is
added using the Add to Workstation
field in the Host Installation Client
Install_Subvolume
The subvolume where OVNM is to be
installed
TCPIP_process_name
The name of the TCPIP process
Home_terminal
A physical hometerm or a process that
can become the home terminal for
OVNM. This process should be
continuously available.
The default value is $VHS
Process_prefix
A two-character prefix that will be used
as the first two characters for all the
OVNM processes, making them unique.
The first character must be a letter, and
both characters must be alphanumeric.
OCC_port
TCP/IP port for OCC. It should be a
valid and unused port number on the
system. The number should be between
1025 and 10000.
The default value is 5020.
OVNM_port
TCP/IP port for OVNM, which is used to
communicate with Operations Manager.
It should be a valid and unused port
number on the system. The number
should be between 1025 and 10000.
The default value is 5030.
License_key
The license key provided by HP.
Guardian_user
The user ID of the OVNM user
Preconfig
For selecting the pre-configured
thresholds. Can have a value of Yes or
No. If the value Yes is specified, then
OVNM will be installed with default
policies.
Only_OVNM_Events
For specifying that only OVNM events
are to be sent to Operations
Manager/Console. Can have a value of
Yes or No.