OVNM 5.3 - Operations Agent for NonStop Installation Guide

Appendix G: Sample InstInfo File 132
Table 3 INSTINFO Parameters
Parameter Description Default Value
EMON_DIST01_Collector
The first default event source (collector)
for OVNM filter.
The default is $0.
EMON_DIST01_Filter
The name of the OVNM filter file being
used for filter -
<volume>.<subvolume>.<filter file>. You
can define maximum three filters.
The default is PASSALL filter.
EMON_DIST01_CPU
The CPU on which the distributor process
will run.
The default value is same as specified in
PrimaryCpu.
EMON_DIST01_Priority The priority of the distributor process. By default the value is 10 less than the
priority specified in MainPtiority.
EMON_DIST01_Name
Name of the distributor
Name of the distributor process.
EMON_DIST01_ProcessName
EMON_DIST02_Collector
The second default event source
(collector) for filter.
The default is $ZLOG.
EMON_DIST02_Filter
The name of the filter file being used for
filter - <volume>.<subvolume>.<filter
file>. You can define maximum three
filters.
The default is ZTSMFLTR filter.
EMON_DIST02_CPU
The CPU on which the distributor process
will run.
The default value is same as specified in
PrimaryCpu.
EMON_DIST02_Priority
The priority of the distributor process.
By default the value is 10 less than the
priority specified in MainPriority.
EMON_DIST02_Name
Name of the distributor.
EMON_DIST02_ProcessName Name of the distributor process
OCC_DIST01_Collector The default event source (collector) for
OCC filter.
The default is $0
OCC_DIST01_Filter
The name of the OCC filter file being
used for filter -
<volume>.<subvolume>.<filter file>. You
can define maximum three filters.
The default is ZTFLTRO filter
OCC_DIST01_CPU CPU on which the distributor (DIST01)
process will run.
OCC_DIST01_Priority
The priority of the distributor process
OCC_DIST01_Name
Name of the distributor
OCC_DIST01_ProcessName
Name of the distributor process
OCC_DIST02_Collector Name of the collector process.
OCC_DIST02_Filter The name of the OCC filter file being
used for filter -
<volume>.<subvolume>.<filter file> for
DIST02. You can define maximum three
filters.
The default is $ZLOG filter.
OCC_DIST02_CPU
CPU on which the distributor (DIST02)
process will run
OCC_DIST02_Priority The priority of the distributor (DIST02)
process.
OCC_DIST02_Name
Name of the distributor (DIST02).