OVNM 5.3 - Operations Agent for NonStop Installation Guide

Appendix G: Sample InstInfo File 133
Appendix G: Sample InstInfo File 133
Table 3 INSTINFO Parameters
Parameter Description Default Value
OCC_DIST02_ProcessName
Name of the distributor (DIST02)
process.
Mail_Option
To enable or disable e-mail feature. Can
have a value of Yes or No.
Email_Trace
To configure tracing. Options available
are Error, None and Progress. Error is
the default value
Email_QreadIntervalSec
How often the host application is to pick
up queued mails. Specify a value
between 1 – 36000 seconds.
The default value is 30 seconds.
Email_RetryIntervalSec
The duration in seconds after which the
host application will retry for failed
mails. Specify a value between 1 –
36000 seconds.
The default value is 300 seconds.
Email_GiveUpMin The duration after which the host
application will stop trying to send the e-
mail and delete it from the queue.
The default value is 120 minutes and
you can specify a value in the range 1-
600.
Sender_ID
The sender e-mail ID. Sender ID is the ID
you want associated as the sender of the
emails generated by OVNM
Email_Port
The port used by the e-mail server.
The default value is 25.
Tandem_Email_Ip The IP address of the NonStop server.
Email_Server_Ip The IP address of the mail server.
Use_Default_Templates Specify to use standard or custom EMS
template. Can have a value of Yes or
No.
b24options
Check for the availability of BASE24
plug-in. Can have a value of Yes or No.
closetdf OVNM will open the TDF file to read the
process thresholds anytime or only when
necessary, that is, when the polling
interval expires. Can have a value of
Yes or No.
b24linelstobj
Select BASE24 LINE objects to be
monitored via the ListObjects command.
Can have a value of Yes or No.
b24linklstobj Select BASE24 LINK objects to be
monitored via the ListObjects command.
Can have a value of Yes or No.
b24processlstobj
Select BASE24 PROCESS objects to be
monitored via the ListObjects command.
Can have a value of Yes or No.
b24stationlstobj Select BASE24 STATION objects to be
monitored via the ListObjects command.
Can have a value of Yes or No.
b24systemlstobj
Select BASE24 SYSTEM objects to be
monitored via the ListObjects command.
Can have a value of Yes or No.
InstallationDate
OVNM installation date and time.