OVNM 5.3 - Operations Agent for NonStop Installation Guide

Installing OVNM on HP NonStop Server 31
Installing OVNM on HP NonStop Server 31
Table 3-2 Communication Parameters
Area Parameter Name Description Additional Information
• FTP Port
• FTP Address
• Type of FTP
Specify the FTP port to be used for the
FTP session with the HP NonStop Host.
Use the corresponding Address field to
specify the IP address or the DNS name
for the FTP session with the HP NonStop
Host.
There are 3 types of FTP that are
supported - standard, SFTP, and SSL. If
your NonStop Host is configured to use
one of those options, pick the selection
that matches your host. The default
value for this application is standard.
This is unsecured FTP. SFTP is normally
part of SSH2 and will normally use the
same port as the SSH2 port.
SFTP provides greater security when
communicating between your PC and
the NonStop. SSL is another secure
protocol. But, whatever option you
choose, it has to match the
configuration on your NonStop.
• Default port: 21
Services
Available
TACL Selecting the radio button will enable
TACL service to be used to logon to the
host.
OSS
Selecting the radio button will enable
OSS service to be used to logon to the
host.
Other
Selecting the radio button will enable
you to specify any other service for
logging on to the host.
The Other field is provided in case you
have a different service name for the
standard OSS or TACL Logon services.
The Host Installation Client only
provides support for installation using
the standard services; TACL or OSS. If
you enter a service, which is neither of
TACL or OSS type in the Other box, the
installation will not be successful.
If you select Other as the service to logon
and do not specify the service to be used in
the corresponding box, it will be considered
a valid entry and a carriage return will be
used for the Service name while logging on
to the HP NonStop host.
Command Prompt
To specify a customized command
prompt string displayed after logon.
• Default: DEFAULT