OVNM 5.3 - Operations Agent for NonStop Installation Guide

Installing OVNM on HP NonStop Server 32
6. Click the Show Advanced Options button to access and configure advanced communication parameters.
These additional IP addresses and ports will be used if the primary IP and ports fail. In addition, if you use
Xypro (or a similar product) and do not have direct access to the user id that is used by OVNM, you can
specify the Xypro command (and optional password) on this screen as well.
Figure 3-5 Communication Tab Page – Advanced Communication Information
7. Specify the following information.
a. If you use Xypro (or something similar that requires another logon or special command) you can enter
that command and optional password into the Command and Password boxes. If the Secondary Tacl
prompt is not going to be 1, you can also change that so the HIC knows when the login sequence is
complete.
b. Console and Enterprise Solution Information: Select the various check boxes and specify the
corresponding IP Address (or DNS name), TCPIP Process name and Port number in the fields available
for the Console and Enterprise solution.
c. OCC, ObjectMap and ObjectStats Information: Select the various check boxes and specify the
corresponding IP Address (or DNS name), TCPIP Process name and Port number in the fields available
for OCC, ObjectMAP and ObjectStats.
8. Click the Back button to move to the previous tab page.