OVNM 5.3 - Operations Agent for NonStop Installation Guide

Installing OVNM on HP NonStop Server 37

16. Click the OCC tab to configure the distributors and filters to be used by the monitoring portion of OVNM.

The OCC tab page is displayed.

Figure 3-9 New OVNM Configuration – OCC Tab Page

The distributor and its corresponding collectors and filters defined in the OCC Distributors area is used by the

OCC process ($OVOCC). This portion of OVNM is responsible for the monitoring of the objects as well as

consuming events that are defined as EMS thresholds. There are two default OCC distributors, DIST01 and

DIST02. The collectors and filters for DIST01 are $0 and $SYSTEM.OVNM.PASSALL. The PASSALL filter is used by

OVNM for event correlation and should not be modified. For DIST02, the corresponding collectors and filters are

$ZLOG and $SYSTEM.OVNM.ZTSMFLTR. The ZTSMFLTR passes all the events for the TANDEM.TSM and

TANDEM.SPR subsystems generated on the HP NonStop system.

Additional Distributors and Filters can be configured if you have applications that log to other EMS collectors and

you want to define EMS thresholds against them.