OVNM 5.3 - Operations Agent for NonStop Installation Guide

Installing OVNM on HP NonStop Server 42
23. Select the Enterprise Management Server to receive NonStop Events from the drop-down box. This option is
enabled only when the Fault Tolerance Enabled check box is selected.
Figure 3-14 New OVNM Configuration – MQ Series Tab Page
NOTE: This panel is ONLY to be used when you are going to use OVNM to monitor your MQ environment(s).
For information on installing and verifying MQ Series Plug-in refer to documentation on MQ Series
Plug-in for OVNM.
24. This panel is used to define the various MQ environments that are going to be monitored by OVNM. For
each environment, you need to specify the following fields.
Table 3-7 MQ Series Parameters
Area
Parameter Name
Description
Additional Information
MQ Series
Config Name Used to provide a very short name to
the environment
Maximum 8 characters allowed
CPU
Specify the CPU that you want to use for
the monitor program (MQSVR53) for
this MQ environment
Priority Set the priority of the monitor program
(MQSVR53)
INI Filename
Specify the INI file that is associated
with this particular MQ environment.
Obey Fielname
Specify the name of an Obey file that
will be executed by the STRTMQ job
prior to running the MQSVR53
program.
The PARAMs that get loaded by this Obey
file are the PARAMs required by the MQ
environment.
25. Once you have entered the necessary data, click Add.
26. Repeat that process for each MQ environment you wish to monitor. You may add up to 20 configurations.