OVNM 5.3 - Operations Agent for NonStop Installation Guide

Installing OVNM on Linux Server 79

the node and restart the operation. If the user chooses Files the script adds the entry in the hosts file and

continues.

Name resolution for NODE.hp.com failed.

Not able to determine the method of name resolution used.

Please specify the name resolution scheme which you are using, from:

1) DNS

2) files

7. Enter the label of the HP NonStop node that you want to be displayed in HPOM.

\NODE

8. Enter the port for NonStop Alerts on the specified node. The default port is 5030.

5030

9. OVNM can be configured to support one or more HP Operations Management Servers. You can configure

OVNM to support a pair of HPOM Management Servers as primary, backup or broadcast.

For details, refer to Chapter 12: Event Delivery Management.

Specify the HPOM Management server as Primary, Backup or broadcast server. Enter 1 for primary, 2 for

backup and 3 for broadcast.

Once the required information is entered correctly the following message is displayed.

Adding \NODE node to the NonStop-Server node group bank as IP node

Operation successfully completed.

Adding \NODE service map and assigning it to opc_adm user...

Successfully added service file

file: /opt/OV/ovnm/bin/service_file2.xml (SVC10-111)

Successfully assigned services to operator opc_adm (SVC10-113)

10. The system confirms if you want to add another node. To configure another node, type Y, otherwise type

11. The system confirms if u want to auto start OVNM at system reboot. To add OVNM at startup, type Y,

otherwise type N.

The will display the following message.

Adding OVNM at Startup

Added OVNM at system startup successfully.

This completes the OVNM configuration portion of the installation. A successful configuration will display

the following message.

OVNM is successfully configured. Deploy the NonStop Server policies on to OMU

Server and assign the responsibilities to the users for NonStop messages.

6-3-1 Configuring the HPOMU 9 Environment

The OM 9 UNIX Administration UI will be used to configure the HP NonStop Server templates, and assign

HPOM9 users responsibilities. The NonStop Server icon is added to the OVO Node Bank Group after OVNM

installation. To configure the HPOM9 environment, perform the following steps.

• Assign HP NonStop Server Template Group

• Deploy HP NonStop Server Template Group

• Set User Responsibilities and Applications

Follow procedures in the section, Configuring the HPOM9 Environment to complete Configuration