OVNM 5.3 - Operations Agent for NonStop Object Configuration Client Guide

Object Configuration Client Interface 18
NOTE:
In the previous OVNM versions, when you used the Object Configuration Client to turn Node
Monitoring OFF
, the OVNM application would continue to consume EMS messages and react to them (if they
were defined in an EMS threshold) and send them to
HPOM (if specified). With OVNM release 4.8, when
you use the Object Configuration Clien
t to turn monitoring off/on for the entire node, you have the option of
having this impact the EMS traffic as well. For details on how to enable the feature, refer to
Customizing Node
Monitoring Feature
topic in OVNM User and Installation Guide.
• Activate Config Monitoring
This option is used to activate monitoring for the selected threshold configuration(s). It activates monitoring
for all the objects under the selected threshold(s), which are flagged for active monitoring. This option is
enabled only if monitoring is inactive for the selected threshold(s).
• Inactivate Config Monitoring
This option is used to inactivate monitoring for the selected threshold configuration(s) only. It inactivates
monitoring for all the objects under the selected threshold(s), which are flagged for active monitoring. This
option is enabled only if monitoring is active for the selected threshold(s).
• Activate Object Monitoring
Clicking this option activates monitoring for the selected object(s) in the Objects pane. This option is
enabled only if the monitoring for the selected object(s) is inactive.
• Inactivate Object Monitoring
Clicking this option inactivates monitoring for the selected object(s) in the Objects pane. This option is
enabled only if the monitoring for the selected object(s) is active.
2-6-5 Recovery Menu
The various options available in the Recovery menu are:
• Activate Config Recovery
• Inactivate Config Recovery
• Activate Object Recovery
• Inactivate Object Recovery
Figure 2-12 OCC Recovery Menu
The various options available in the Recovery menu are:
• Activate Config Recovery
This option is used to activate recovery for the selected threshold configuration(s). It activates recovery for
all the objects under the selected threshold(s) for which recovery has been configured. This option is
enabled only if recovery has been configured but inactive for the selected threshold(s).
• Inactivate Config Recovery
This option is used to inactivate recovery for the selected threshold configuration(s). It inactivates recovery
for all the objects under the selected threshold(s) for which recovery has been configured. This option is
enabled only if recovery has been configured and active for the selected threshold(s).
• Activate Object Recovery
This option is used to activate recovery for the selected object(s). This option is enabled only if recovery has
been configured but inactive for the selected threshold(s).
• Inactivate Object Recovery
This option is used to inactivate recovery for the selected object(s). This option is enabled only if recovery
has been configured and active for the selected threshold(s).