OVNM 5.3 - Operations Agent for NonStop Object Configuration Client Guide

Object Configuration Client: The Understanding 42
the Schedule displays the Schedule dialog box. Use the various options available on the Schedule dialog box to
specify a customized recovery schedule.
Figure 3-12 OCC Recovery Schedule Dialog Box
The default Delay Interval value is 05 minutes. This means that the OVNM recovery process on the HP NonStop
host will check for object state changes every 5 minutes. The unit for Delay Interval can be changed from minutes
to seconds or hours. The frequency can also be changed within the range of 01 to 59, giving a possible range
of 1 second to 59 hours for the time between violation checks.
The daily default Start Time and Stop Time are 00:00 and 23:59, respectively. This indicates that OVNM
recovery will be active throughout the day, based on the HP NonStop system time. You can enter a different
recovery start time and stop time by entering the appropriate hours and minutes in the Start Time and Stop Time
boxes, respectively. By default the thresholds are recovered continuously seven days a week using the All check
box in the Days group box.
You can select specific days using the check boxes for different days of the week. Select the Next scheduled day
check box to start recovery on the next day scheduled.
You can activate or inactivate recovery using the Recovery box in the Action tab page.
The Log area is used to specify the message log to be generated if the recovery is a Success or a Failure. The
three options available are None, User Text and Default. If you select None, no message will be generated. You
can specify the text for the message by selecting the User Text option or log the default message using the Default
option.
For details on various recovery methods, refer to Chapter 3: Recovery Methods in the OVNM Object Reference
Guide.
Object Configuration Client:
The Understanding