OVNM 5.3 - Operations Agent for NonStop Object Configuration Client Guide

Working With Object Configuration Client 67
i. Activate or deactivate recovery using the Recovery box in the Options section in the Action tab page.
3. Entering E-Mail Alert Information
To specify the e-mail alert data, click the Mail tab on the Actions dialog box. The e-mail feature is not
activated by default. Click the Mail on Violation check box to enable the e-mail feature.
Figure 4-12 OCC Actions Dialog Box with Mail Tab Page
a. Enter the e-mail addresses, profile names or the distribution list to whom the alerts should be sent in the
To box.
b. Specify the subject of the message to be sent in case of a violation in the Subject box.
c. Enter the message to be sent in case of a threshold violation in the Violation Message box. You can
also Click the Parameters list link to use substitution parameters.
d. The Mail on escalation only check box can be selected to allow OCC to send e-mail alerts only when
an escalation event is generated.
e. To enter the specifications for the mail message to be sent when the object in violation returns to its
normal state, select the Mail on Normal check box.
f. Selecting the Mail on Normal check box activates the Subject and the Normal Message boxes. Specify
the subject in the Subject box and the message in the Normal Message box. As in the case of violation
message, you can use the Parameters list link.