OVNM 5.3 - Operations Agent for NonStop Object Reference Guide

Threshold Policies 126
2-23-2 OBJECT CLASS: PORT
Policy
Description
Operators Allowed
CLOSE-WAIT CLOSE-WAIT allows you to check if the PORT is
CLOSE-WAIT (
TCP layer is waiting for a connection
termination request from the local user).
•
EQUAL TO
• NOT EQUAL TO
ESTABLISHED
ESTABLISHED allows the user to check if the PORT
is ESTABLISHED (there is an open connection and
the user can send and receive data).
• EQUAL TO
• NOT EQUAL TO
FIN-WAIT (1 OR 2) FIN-WAIT (1 OR 2) allows the user to check if the
port
is waiting for a connection termination request
from the remote TCP or is waiting for a termination
of data to be received after sending a FIN.
No operator.
LISTENING
LISTENING allows the user to check if the PORT is
LISTENING (waiting for a connection request from
any remote TCP site).
No operator.
NOT LISTENING NOT LISTENING allows the user to check if the
PORT is NOT LISTENING (not waiting for a
connection request from any remote TCP site).
No operator.
PING AVG
PING AVG allows the user to check the average
ping response time. Specify time in milliseconds.
Enter IP address in the PORT field.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <
value1> and less than
<value2>
• Less than <value1> or greater than
<value2>
PING MAX PING MAX allows the user to check the maximum
ping response time. Specify time in milliseconds.
Enter IP address in the PORT field.
•
Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
•
Greater than <value1> and less than
<value2>
• Less than <value1> or greater than
<value2>
PING MIN
PING MIN allows the user to check the minimum
ping response time. Specify time in milliseconds.
Enter IP address in the PORT field.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <
value1> and less than
<value2>
• Less than <value1> or greater than
<value2>
PING PERCENT LOSS PING PERCENT LOSS allows the user to check the
percent of Ping messages that are lost. Specify
time in milliseconds. Enter IP address in the PORT
field.
•
Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
•
Greater than <value1> and less than
<value2>
• Less than <value1> or greater than
<value2>