OVNM 5.3 - Operations Agent for NonStop Object Reference Guide

Threshold Policies 155
Policy
Description
Operators Allowed
004:LINK-FAIL-ABN-FIB
This threshold type allows the user to check the
number of times MTP level 2 took the link out of
service due to an unexpected forward indicator
bit.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less than
<value2>
• Less than <value1> or greater than
<value2>
005:LINK-FAIL-SIOS-RCV
This threshold type allows the user to check the
number of times MTP level 2 took the link out of
service because it received a Status Indication
Out-of-Service link status signal unit from the
remote end of the link.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less than
<value2>
• Less than <value1> or greater than
<value2>
006:LINK-FAIL-EXC-DELAY-
ACK
This threshold type allows the user to check the
number of times the link was taken out of service
because MTP level 2 did not receive an ACK for
an MSU before timer T7 expired.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less than
<value2>
• Less than <value1> or greater than
<value2>
007:LINK-FAIL-EXC-CONG-
DUR
This threshold type allows the user to check the
number of times MTP level 2 took the link out of
service because the remote end was still in a
congested state when timer T6 expired.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less than
<value2>
• Less than <value1> or greater than
<value2>
008:LINK-FAIL-SUERM-
EXCEED
This threshold type allows the user to check the
number of times MTP level 2 took the link out of
service because the signal unit error rate threshold
was exceeded.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less than
<value2>
• Less than <value1> or greater than
<value2>
009:LINK-FAIL-IDLE-TIMER-
EXPIRE
This threshold type allows the user to check the
number of times MTP level 2 took the link out of
service because it received no signal units before
the idle link timer expired.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less than
<value2>
• Less than <value1> or greater than
<value2>
Threshold Policies