OVNM 5.3 - Operations Agent for NonStop Object Reference Guide

Threshold Policies 156
Policy
Description
Operators Allowed
010:LINK-FAIL-TRANSMIT-
TIMEOUT
This threshold type allows the user to check the
number of times MTP level 2 took the link out of
service because the transmitter could not
successfully send a signal unit due to loss of
clocks.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less than
<value2>
• Less than <value1> or greater than
<value2>
011:LINK-FAIL-ECM-FAILURE
This threshold type allows the user to check the
number of times MTP level 2 took the link out of
service because a failure occurred at the ECM.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less than
<value2>
• Less than <value1> or greater than
<value2>
012:LINK-STOP-LEVEL-3
This threshold type allows the user to check the
number of times MTP level 2 took the link out of
service because it received a deactivate request
from MTP level 3.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less than
<value2>
• Less than <value1> or greater than
<value2>
013:LINK-OOS-DURATION
This threshold type allows the user to check the
total number of seconds the link was out-of-
service.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less than
<value2>
• Less than <value1> or greater than
<value2>
014:NAKS-RECEIVED
This threshold type allows the user to check the
number of NAKs MTP level 2 has received from
the far end MTP level 2.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less than
<value2>
• Less than <value1> or greater than
<value2>
015:MSUS-RETRANSMIT
This threshold type allows the user to check the
number of message signal units MTP level 2 has
retransmitted as a result of NAKs.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less than
<value2>
• Less than <value1> or greater than
<value2>