OVNM 5.3 - Operations Agent for NonStop Object Reference Guide

Threshold Policies 157
Policy
Description
Operators Allowed
016:MSU-OCTETS-
RETRANSMIT
This threshold type allows the user to check the
total number of bytes (octets) contained in all the
MSUs that MTP level 2 has retransmitted.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less than
<value2>
• Less than <value1> or greater than
<value2>
017:LVL2-CONG-ACCEPT-
ONSET
This threshold type allows the user to check the
number of times that MTP level 2 has entered the
congestion accept state (local busy).
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less than
<value2>
• Less than <value1> or greater than
<value2>
018:LVL2-CONG-DISC-
ONSET
This threshold type allows the user to check the
number of times that MTP level 2 has entered the
congestion discard state (local busy).
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less than
<value2>
• Less than <value1> or greater than
<value2>
019:DURATION-LOCAL-
CONG
This threshold type allows the user to check the
total number of seconds MTP level 2 was locally
congested.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less than
<value2>
• Less than <value1> or greater than
<value2>
020:REMOTE-LVL2-CONG
This threshold type allows the user to check the
number of times MTP level 2 at the remote end of
the link has entered the congestion state and
transmitted "budy" link status signal units.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less than
<value2>
• Less than <value1> or greater than
<value2>
021:REMOTE-LVL2-CONG-
DURATION
This threshold type allows the user to check the
total number of seconds the remote MTP level 2
has been congested.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less than
<value2>
• Less than <value1> or greater than
<value2>
Threshold Policies