OVNM 5.3 - Operations Agent for NonStop Object Reference Guide

Threshold Policies 170
Policy
Description
Operators Allowed
029:OUT-CONNLESS-SSN-
PROHIBIT-ROUT-FAIL
This threshold type allows the user to check the
number of outbound connectionless messages that
were sent to a prohibited subsystem.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less than
<value2>
• Less than <value1> or greater than
<value2>
030:OUT-CONNLESS-NET-
ROUT-FAIL
This threshold type allows the user to check the
number of outbound connectionless messages that
resulted in a general network routing failure error
when routed.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less than
<value2>
• Less than <value1> or greater than
<value2>
031:OUT-CONN-ORIENT-
MSGS
This threshold type allows the user to check the
number of outbound connection oriented
messages that were sent to the SS7 network.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less than
<value2>
• Less than <value1> or greater than
<value2>
032:OUT-CONN-ORIENT-
MSGS-ROUT-FAIL
This threshold type allows the user to check the
number of outbound connection oriented
messages that produced an error when the system
attempted to find a link to which messages will be
routed.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less than
<value2>
• Less than <value1> or greater than
<value2>
033:OUT-CONN-ORIENT-
CONG-ROUT-FAIL
This threshold type allows the user to check the
number of outbound connection oriented
messages that resulted in a congestion failure
error when routed.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less than
<value2>
• Less than <value1> or greater than
<value2>
034:OUT-CONN-ORIENT-
DPC-CONG-ROUT-FAIL
This threshold type allows the user to check the
number of outbound connection oriented
messages that resulted in a congestion failure at
the Destination Point Code (DPC) address.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less than
<value2>
• Less than <value1> or greater than
<value2>